Home > Port Forwarding > Port Forwarding Separate Modem And Router

Port Forwarding Separate Modem And Router

Contents

In bridge mode, it doesn't have an IP address, and simply bridges two network segments (hence the name). vonPoonBurGer on March 2008Xbox Live:vonPoon | PSN: vonPoon | Steam: vonPoonBurGer0 txt Registered User regular March 2008 edited March 2008 i had a similar problem myself, and since my ISP had I have tried to only forward port 25565 to my desktop on the default router. That modem is just going to be giving you an internet connection over your cable line. http://nuvisiongraphx.com/port-forwarding/cisco-800-router-port-forwarding.html

R1 also has an internal IP address which provides NAT to the internal LAN1 network below it. Can you ping it? By switching to bridge mode, you are instructing modem/router combo to essentially act as a modem only-turning off all routing functions. Yes, my password is: Forgot your password? http://www.tomshardware.com/forum/31940-42-port-forwarding-modem-router

Port Forwarding Separate Modem And Router

the router as a switch in my room with DHCP disabled, Later I found out it worked as a kind of access point as well. Võite seda eelistust all muuta. My laptop is going to run over Wi-Fi. You may also...

Sulge Lisateave View this message in English Vaatate YouTube'i Eesti keeles. Teave Press Autoriõigused Autorid Reklaam Arendajad +YouTube Tingimused Privaatsus Eeskirjad ja turvalisus Tagasiside saatmine Proovige uusi funktsioone Laadimine ... Then I tried to forward the port on both routers to my desktop. Double Router Port Forwarding In essence, it means that all ports are forwarded from the modem to the DMZ host behind the modem.

This is done similar to the example above with the Alcatel SpeedTouch modem (in this case it is 192.168.2.104 for the computer and 192.16.2.1 as default gateway, the IP address of Double Router Detector But what if you start seeing small but annoying problems over the course of several weeks? This is done by typing the IP address of the router (in this case 192.168.2.1) into the address bar of the Internet Explorer (similar to the example above). Now all your internet-bound traffic is passing through your new router and the ISP-supplied router.

After filling in this window for both ports, click the link Apply in the yellow bar at the bottom of the window. Modem Port Definition Forwarding ports: how it works The computer is by way of the modem connected to the internet. After testing some stuff with Azureus I got a timeout with the port test tool and a yellow "meh" face (NAT problem) on a test download, this being with the router Join the community here.

Double Router Detector

This page tells the exact procedure for all types of routers in combination with the used application. The bad news is the modem/router is onesupplied by Frontier for my DSL connection and there is no option forbridging, probably because Frontier has installed their own firmware. Port Forwarding Separate Modem And Router Browse other questions tagged connection port-forwarding minecraft or ask your own question. Double Router Forwarding How can the regression error term ever be correlated with the explanatory variables?

share|improve this answer edited Dec 17 '14 at 9:48 answered Dec 16 '14 at 18:55 Xen2050 5,97121030 hmm, i gave my personal router .1.2 myself. click site gateway) > PC (realtek RTL8139 family PCI NIC) (192.168.2.136, statically assigned) Now when the network is simply this: Modem (same) > PC (192.168.1.136 static) It works just fine with the ports Do I use 'was' or 'did' as an auxiliary in an interrogative clause? Already have an account? Cable Modem Port Forwarding

The only thing connected to LAN1 is the router R2. What is the opposite of Cancel? That's causing problems with the main router using the same addresses. news Instructions to do that are in the manual, which you can download from here.

Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users. Cable Modem Ports If it is then I suppose it's doing NAT at least to some extent. Also, if the ISP-supplied unit has a Wi-Fi access point that some of your devices are connected to (say, your iPad) then that access point will no longer work and you

asked 2 years ago viewed 17014 times active 2 years ago Blog Stack Overflow Podcast #101 - Matt Mullenweg on Open Source, Blogs, and Beyoncé Visit Chat Related 0Port Forwarding /

  1. I left that blank.
  2. Once you've got the router connecting via PPPoE, it should have a routable IP address (one that doesn't start with 10., 192.168., 172.16-31., or 169.) in the Status page of the
  3. Let's talk about how to forward ports through this network.
  4. TechSpot is a registered trademark.
  5. Next we change the network on Router 2 (personal (access point) router) to 192.168.2.X and plug a cable from Router 1's Ethernet to Router 2's uplink.
  6. You can easily check this if you only have a DHCP server running on your modem." <---- What has having a DHCP server on his 'modem' got to do with checking
  7. Try googling "bridge mode" along with the model number of your ISP-supplied router, and you may find instructions for enabling bridge mode. Sometimes you need to directly contact your ISP, though, to have them set
  8. The User's Guide for that router is here So, please specify the make/model of the modem.Click to expand...
  9. So is it working correctly or not?Michael

    May 18, 2016 Jason Fitzpatrick @acubley: If your goal is to use the second router simply as an additional Wi-Fi access point, you can
  10. Samir Duran Duran on March 20080 Sign In or Register to comment.

If you don't, he'll break your legs! From now on, the incoming traffic on these ports are forwarded to the same port on the computer with the IP address 10.0.0.1 and the file sharing application must be working This page seems to have instructions for switching to bridge mode. What Is A Modem Port If that is the case, simply set up the port forwarding on the modem and all should be working fine.

Beware, it’s quite common for dsl ISPs to provide an all-in-one device, a combination dsl modem+router. Before we get into exactly why that can cause such a headache, let's look at how you might end up in that situation without even realizing it. Extending the network with a router For now there was a situation with one computer connected to the internet with a Alcatel SpeedTouch modem-router. More about the author As stated earlier, if the IP address of a network device for which ports you've forwarded ports changes, the ports will not be forwarded to the correct place.

There's a very good chance if you're experiencing some sort of difficult-to-pin-down network problem and you're running two routers on the same network, that the two router setup is to blame. To open/forward the ports given by the application, the NAPT Entries must be filled in. In all these instances, you end up in a situation where any given communication on your home network may (or even must) pass through two routers. Connect the uplink port to your modem.

How to forward the ports on your own router, visit the page www.portforward.com/english/routers/port_forwarding/routerindex.htm. R2's external IP address should really be static. they have just their router device doing NAT). It is possible that you'd be able to set up port forwarding without configuring your modem for bridge mode, but it would require that you enter every port forwarding rule twice.

Dismiss Notice TechSpot Forums Forums TechSpot Core Networking Today's Posts Port forwarding a modem and arouter ByIn10s · 6 replies Nov 28, 2012 Post New Reply Hey guys I need some The computer will boot faster because there is no need to wait for an internet connection for assigning the IP address automatically. In your case, your internet's main/default router is 192.168.1.1, and it hands out addresses 192.168.1.xxx, so your router gets 192.168.1.2. (If I read the Q correctly). I always connect the secondary router's WAN port into one of the main router's LAN ports (or use the secondary router's wifi in "client" mode and connect to the main router

However, if your routers support it, you can try partial octet sub netting as show here.